No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create hyper_metro_vstore_pair general

create hyper_metro_vstore_pair general


The create hyper_metro_vstore_pair general command is used to create a HyperMetro vStore pair.


create hyper_metro_vstore_pair general domain_id=? local_vstore_id=? remote_vstore_id=? { preferred_mode=? | preferred_site=? } *





domain_id=? ID of the HyperMetro domain.

Run the "show hyper_metro_domain general" command without parameters to obtain the value.

local_vstore_id=? ID of the local vStore.

Run the "show vstore" command without parameters to obtain the value.

remote_vstore_id=? ID of the remote vStore.

On the remote device, run the "show vstore" command without parameters to obtain the value.

preferred_mode Mode of setting the preferred site.

The value can be:

  • "along_with_active": The active end is the preferred site.
  • "manual": manual.
preferred_site Preferred site.

The value can be:

  • "local": local end.
  • "remote": remote end.



Usage Guidelines



Create a HyperMetro vStore pair.

admin:/>create hyper_metro_vstore_pair general domain_id=1 local_vstore_id=1 remote_vstore_id=2
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381695

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next