No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_device general

change remote_device general


The change remote_device general command is used to rename remote devices. The remote devices must be heterogeneous storage devices.


change remote_device general remote_device_id=? [ name=? ] [ compress_algorithm=? ] [ compress_judge=? ]





remote_device_id=? ID of a remote device.

To obtain the value, run "show remote_device general".

name=? Updated name of a remote device.

The value contains 1 to 31 characters including letters, digits, hyphens (-), underscores (_), and periods (.).

compress_algorithm=? Compress level to be set.

The value could be:

  • fast:The best compress performance.
  • deep:The best compress efficiency. The default value is "fast".
compress_judge=? Whether to enable smart compress.

The value could be:

  • Yes:enable.
  • No:disable.The default value is Yes.



Usage Guidelines



  • Rename remote device "1" to "newname001".

    admin:/>change remote_device general remote_device_id=1 name=newname001
    Command executed successfully.
  • Change the compress level to "deep" and compress judge to "yes" of remote device "1".

    admin:/>change remote_device general remote_device_id=1 compress_algorithm=deep compress_judge=yes
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380991

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next