No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change interface_module

change interface_module

Function

The change interface_module command is used to modify the properties of a specific interface module.

Format

change interface_module interface_module_id=? mode=?

Parameters

Parameter

Description

Value

interface_module_id=? ID of an interface module.

To obtain the value, run "show interface_module" without parameters.

mode=? Interface module mode.

The value can be "FC", "FCoE/iSCSI", "Cluster", or "Ethernet", where:

  • "FC": indicates the interface module is in FC mode.
  • "FCoE/iSCSI": indicates the interface module is in FCoE/iSCSI mode.
  • "Cluster": indicates the interface module is in cluster mode.
  • "Ethernet": indicates the interface module is in Ethernet mode.

Level

Administrator

Usage Guidelines

  • Before performing this operation, ensure that the services of all ports on the interface module are stopped.
  • After performing this operation, create a new network based on the current work mode of the interface card.
  • OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems support this command.

Example

Change the mode of the interface module whose ID is "CTE0.A0" to FC.

admin:/>change interface_module interface_module_id=CTE0.A0 mode=FC
DANGER: You are about to modify the work mode of the interface module.
This operation will cause that the services of all ports on the interface module are interrupted.
Suggestion:
1.Before you perform this operation, ensure that the services of all ports on the interface module are stopped.
2.After performing this operation, create a new network based on the current work mode of the interface module.
Have you read danger alert message carefully?(y/n)Y
Are you sure you really want to perform the operation?(y/n)Y
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 376902

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next