No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show bond_port

show bond_port


The show bond_port command is used to query information about bond ports.


show bond_port [ bond_port_id=? ]

show bond_port [ failover_group_id=? ]





bond_port_id=? ID of the bond port.

To obtain the value, run "show bond_port" without parameters.

failover_group_id=? ID of the failover group.

The value is an integer from 0 to 8191.



Usage Guidelines

  • To query all bond ports, run "show bond_port".
  • To query a specific bond port, run "show bond_port bond_port_id=?".
  • To query bond ports in a specified failover group, run "show bond_port failover_group_id=?".

The parameter bond_port_id and failover_group_id are mutually exclusive.


  • Query all bond ports.

    admin:/>show bond_port
    ID Name Health Status Running Status MTU Port ID List
    -- ------- --------------- --------------- --------------- ---------------
    0 newbond Normal Link Up 2000 ENG0.B1.P0,ENG0.B1.P1
    1 newbond2 Normal Link Up 2000 ENG0.A1.P0,ENG0.A1.P1
  • Query the bond ports in failover group "0".

    admin:/>show bond_port failover_group_id=0
    ID Name Health Status Running Status MTU Port ID List
    -- ------- --------------- --------------- --------------- ---------------
    549772730113 test Normal Link up 3000 ENG0.B3.P0,ENG0.B3.P3

System Response

The following table describes the parameter meanings.




ID of the bond port.

Port ID List

ID list of bonded ports that form the bond port.


Bond port name.

Health Status

Health status of the bond port.

Running Status

Running status of the bond port.


MTU of the bond port.

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406317

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next