No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create vstore general

create vstore general

Function

The create vstore general command is used to create a vStore.

Format

create vstore general name=? [ description=? | san_capacity_quota=? | nas_capacity_quota=? ]

Parameters

Parameter

Description

Value

name=? vStore name.

The value contains letters, digits, underscores (_), periods (.), or hyphens (-). The name contains 1 to 31 characters.

description=? vStore description.

The value consists of a maximum of 255 characters.

san_capacity_quota=? SAN capacity quota of a vStore.
  • The value is in the format of "capacity value + unit", expressed in KB, MB, GB, TB, or Blocks.
  • The value ranges from 1024 sectors to 18446744073709551614 sectors.
nas_capacity_quota=? NAS capacity quota of a vStore.
  • The value is in the format of "capacity value + unit", expressed in KB, MB, GB, TB, or Blocks.
  • The value ranges from 2097152 sectors to 18446744073709551614 sectors.

Level

Administrator

Usage Guidelines

This command requires license authorization.

Example

  • Create a vStore with the name of vstore1.

    admin:/>create vstore general name=vstore1 description=test san_capacity_quota=100GB nas_capacity_quota=100GB
    Command executed successfully.
    admin:/>show vstore id=2
      ID                      : 2        
      Name                    : vstore1  
      Running Status          : Normal   
      Description             : test     
      SAN Capacity Quota      : 100.000GB 
      SAN Free Capacity Quota : 100.000GB 
      NAS Capacity Quota      : 100.000GB 
      NAS Free Capacity Quota : 100.000GB
      SAN Total Capacity      : 0.000B
      NAS Total Capacity      : 0.000B 
    admin:/>
  • Create a vStore with the name of vstore2.

    admin:/>create vstore general name=vstore2 description=test
    Command executed successfully.
    admin:/>
    admin:/>show vstore id=2
      ID                      : 2      
      Name                    : vstore2 
      Running Status          : Normal 
      Description             : test   
      SAN Capacity Quota      : --     
      SAN Free Capacity Quota : --     
      NAS Capacity Quota      : --     
      NAS Free Capacity Quota : --     
      SAN Total Capacity      : 0.000B 
      NAS Total Capacity      : 0.000B 
    admin:/>

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381862

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next