No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show ib_initiator general

show ib_initiator general


The show ib_initiator general command is used to query the properties of an InfiniBand initiator.


show ib_initiator general [ wwn=? ] [ is_free=? ] [ host_id=? ]





wwn=? Initiator WWN.

To obtain the value, run the "show ib_initiator general" command.

host_id=? Host ID.

To obtain the value, run the "show host general" command.

is_free=? Whether the initiator is free.

The value can be "yes" or "no", where:

  • yes: The initiator is free and can be added to a host.
  • no: The initiator is being used and cannot be added to other hosts.



Usage Guidelines

You can choose only one of the following three parameters: "wwn", "is_free", and "host_id".


Query the properties of an InfiniBand initiator.

admin:/>show ib_initiator general
  WWN               Name                             Health Status  Running Status  Is Free  Multi Path Type  Failover Mode  Path Type      Special Mode Type  vStore ID  
  ----------------  -------------------------------  -------------  --------------  -------  ---------------  -------------  -------------  -----------------  ---------  
  1234567894561234  1234567899999999999999999999999  Normal         Offline         Yes      Third-party      Special Mode   Non-optimized  Mode1              --         
  1234567896541234  --                               Normal         Offline         Yes      Defalut          --             --             --                 --

System Response

The following table describes the parameter meanings.




Initiator WWN.


Initiator name.

Health Status

Initiator health status.

Running Status

Initiator running status.

vStore ID

vStore ID.

Is Free

Whether the initiator is free.

Multi Path Type

Type of the initiator's multipath.

Failover Mode

Failover mode of the initiator.

Special Mode Type

Special mode type of the initiator.

Path Type

Path type of the initiator.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379747

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next