No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by the DeviceManager, this document describes how to use variouscommands classified by functions and how to set the CLI and manage the storage system throughthese commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create remote_replication_vstore general

create remote_replication_vstore general

Function

The create remote_replication_vstore general command is used to create remote replication vStore pairs.

Format

create remote_replication_vstore general local_vstore_id=? remote_vstore_id=? remote_device_id=? [ identity_preserve=? ]

Parameters

Parameter

Description

Value

local_vstore_id

Local vStore ID.

Digit.

remote_device_id

Remote device ID.

Digit.

remote_vstore_id

Remote vStore ID.

Digit.

identity_preserve

Whether to synchronize all configurations.

  • True: synchronizes all configurations.
  • False: synchronizes some configurations.

Level

Administrator

Usage Guidelines

None

Example

Create remote replication vStore pair ID.

admin:/>create remote_replication_vstore general local_vstore_id=10 remote_device_id=1 remote_vstore_id=11 identity_preserve=true 
WARNING: You are about to create a remote replication vStore pair. If the value of "identity_preserve" is "true", it indicates that all configurations are synchronized, and IP addresses and domain names for accessing the primary and secondary end are consistent. Ensure that the IP address of the primary and secondary end are not activated at the same time. 
Suggestion: Before performing this operation, check whether the selected primary and secondary resource and the configured parameters are correct. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181601

Views: 309501

Downloads: 39

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next