No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete hyper_metro_domain general

delete hyper_metro_domain general


The delete hyper_metro_domain general command is used to delete a HyperMetro domain.


delete hyper_metro_domain general domain_id=? [ is_local_delete=? ]





domain_id=? ID of the HyperMetro domain.

Run the "show hyper_metro_domain general" command to obtain the value.

is_local_delete=? Whether to delete the domain from the local device.

The value is "yes" or "no", where:

  • "yes": to delete the domain from the local device.
  • "no": to delete the domain from both local and remote devices.
The default value is "no".



Usage Guidelines



To delete HyperMetro domain "1", run the following command.

admin:/>delete hyper_metro_domain general domain_id=1
WARNING: You are going to delete a HyperMetro domain.
This operation may result in abnormal status of HyperMetro pairs in the HyperMetro domain.
Suggestion: Before performing this operation, ensure that no service is using the HyperMetro domain to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 381414

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next