No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create host_group

create host_group

Function

The create host_group command is used to create a host group.

Format

create host_group name=? [ host_group_id=? | host_id_list=? ] *

create host_group name=? [ host_group_id=? | host_name_list=? ] *

Parameters

Parameter

Description

Value

name=? Host group name.

The value contains 1 to 31 digits, letters, underscores (_), hyphens (-), and periods (.).

host_group_id=? Host group ID.

The value ranges from 0 to n minus one. The n indicates the maximum number product supported of host groups.

If you do not specify this parameter, the system automatically allocates an ID for a new host group.

host_id_list=? Host ID. When this parameter is specified, the host corresponding to the ID is added to a host group.
  • To obtain the value, run "show host general".
  • When multiple hosts need to be added, separate these host IDs with commas (,), or separate host ID range with hyphens (-), such as: 0,5-8.
host_name_list=? Host name.
  • To obtain the value, run "show host general".
  • When multiple hosts need to be added, separate these host names with commas (,), such as: "hostname0,hostname1,hostname8".

Level

Administrator

Usage Guidelines

A host group can be added with a maximum of 64 hosts and a host can be added to a maximum of 64 host groups.

Example

Create host group "test".

admin:/>create host_group name=test
Create host group successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382439

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next