No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete quota general

delete quota general


The delete quota general command is used to delete the default directory quota of a file system, or the quota of a specified quota tree.


delete quota general { quota_id=? | file_system_id=? | quota_tree_id=? } [ quota_type=? ]





quota_id=? Indicates the quota ID.

The value describes the ID of a file system quota.To obtain the value, run the "show quota general" command.

file_system_id=? Indicates the file system ID.

To obtain the value, run the "show file_system general" command.

quota_tree_id=? Indicates the quota tree ID. Format: FSID@QuotaTreeID. FSID ranges between 0 and 65535, and QuotaTreeID ranges between 0 and 4096.

To obtain the value, run the "show quota_tree general" command.

quota_type=? Indicates the quota type.

The value must be "directory".



Usage Guidelines

  • The following parameters are mutually exclusive: "quota_id","file_system_id" and "quota_tree_id".
  • Enter "quota_id" to delete a specified quota, without "quota_type" inputting.
  • Enter "file_system_id" to delete default directory quota of a file system. The "quota_type" must be entered, and the value must be "directory".
  • Enter "quota_tree_id" to delete directory quota on the specified quota tree. The "quota_type" must be entered, and the value must be "directory".


  • Delete the default directory quota of file system 0.

    admin:/>delete quota general file_system_id=0 quota_type=directory
    Command executed successfully.
  • Delete the directory quota of quota tree 0@1.

    admin:/>delete quota general quota_tree_id=0@1 quota_type=directory
    Command executed successfully.
  • Delete the quota of ID 0@1@2@10100.

    admin:/>delete quota general quota_id=0@1@2@10100
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 379819

Downloads: 54

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next