No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system cache_partition

show file_system cache_partition

Function

The show file_system cache_partition command is used to query the cache partition related to a specific filesystem.

Format

show file_system cache_partition file_system_id=?

Parameters

Parameter

Description

Value

file_system_id=? ID of the file system in which you want to check the cache partition information.

To obtain the value, run "show file_system general".

Level

Guest

Usage Guidelines

None

Example

Query the cache partition related to file system "0".

admin:/>show file_system cache_partition file_system_id=0
ID Name 
-- ------ 
0 cache1

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

ID of the cache partition.

Name

Name of the cache partition.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380886

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next