No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore local_vstore_port_status

change remote_replication_vstore local_vstore_port_status

Function

The change remote_replication_vstore local_vstore_port_status command is used to set the deactivation status of all logical ports of the local vStore.

Format

change remote_replication_vstore local_vstore_port_status vstore_pair_id=? port_status=?

Parameters

Parameter

Description

Value

vstore_pair_id Remote replication vStore ID.

To obtain the value, run the "show remote_replication_vstore general" command.

port_status Port status of the local vStore.

The value can be "active" or "inactive".

Level

Administrator

Usage Guidelines

None

Example

  • For the local vStore in the remote replication vStore pair whose ID is 9017acaf20050000, set the status of the port to active.

    admin:/>change remote_replication_vstore local_vstore_port_status vstore_pair_id=9017acaf20050000 port_status=active
    DANGER: You are about to deactivate all the logical ports of the local vStore of the remote replication vStore pair. This operation will cause service interruption or cause service exceptions.
    Suggestion: Before you perform this operation, determine whether the modification is necessary.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.
  • For the local vStore in the remote replication vStore pair whose ID is 9017acaf20050000, set the status of its port to inactive.

    admin:/>change remote_replication_vstore local_vstore_port_status vstore_pair_id=9017acaf20050000 port_status=inactive
    DANGER: You are about to deactivate all the logical ports of the local vStore of the remote replication vStore pair. If the logical port of the remote vStore is in the active state, this operation will cause service interruption and IP conflict.
    Suggestion: Before performing this operation, confirm that the attribute of the forcibly deactivated remote port of the remote replication vStore pair is Yes and all logical ports of the remote vStore are in the inactive state.
    Have you read warning message carefully?(y/n)y
    Are you sure you really want to perform the operation?(y/n)y
    Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382858

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next