No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI provided by DeviceManager, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change lun_migration_split consistency

change lun_migration_split consistency


The change lun_migration_split consistency command is used to split LUN migrations.


change lun_migration_split consistency source_lun_id_list=?






IDs of source LUNs.

To obtain the value, run "show lun_migration general".

To split multiple source LUNs in a batch, separate the IDs of those LUNs by commas (,), or ID range separated by hyphens (-), such as: 0, 5-8.

A maximum of 2048 source LUNs are allowed to be split once time.



Usage Guidelines



To split the LUN migrations whose source LUNs are LUN 3 and 4, run the following command:

admin:/>change lun_migration_split consistency source_lun_id_list=3,4 
CAUTION: You are about to split SmartMigrations. Only source LUNs can be read and written after splitting. 
Suggestion: Before performing this operation, ensure that the current IOPS is low. 
Do you wish to continue?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-09-02

Document ID: EDOC1000181601

Views: 329167

Downloads: 41

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next