No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove hyper_metro_consistency_group pair

remove hyper_metro_consistency_group pair


The remove hyper_metro_consistency_group pair command is used to delete a pair from a HyperMetro consistency group.


remove hyper_metro_consistency_group pair consistency_group_id=? pair_id=?





consistency_group_id=? ID of the HyperMetro consistency group.

Run the "show hyper_metro_consistency_group general" command without any parameters to obtain the value.

pair_id=? ID of the HyperMetro pair.

Run the "show hyper_metro_consistency_group pair" command with consistency group ID to obtain the value.



Usage Guidelines



To delete pair 1 from consistency group 2, run the following command.

admin:/>remove hyper_metro_consistency_group pair consistency_group_id=2 pair_id=1
WARNING: You are about to remove a pair from the HyperMetro consistency group. 
After the pair is removed from the consistency group, the pair will use its own control policies. Its running status is not consistent with that of the consistency group. 
Suggestion: Before performing this operation, ensure that the parameters are correct to prevent service exceptions.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378282

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next