No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
create sid_mapping_rule

create sid_mapping_rule


The create sid_mapping_rule command is used to add an SID mapping rule.


create sid_mapping_rule from_sid=? { to_sid=? | to_name=? } [ mapping_type=? ]





from_sid Pre-mapping SID.

The value is a string containing 3 to 256 characters and must meet definitions in [MS-DTYP].

to_sid Post-mapping SID.

The value is a string containing 3 to 256 characters and must meet definitions in [MS-DTYP].

to_name Post-mapping user (group) name.

The value is a string containing 1 to 256 characters. The value cannot contain (/), ([]), (:), (;), (|), (=), (,), (+), (*), (?), (<>), (@), ("), and control characters. The last character cannot be (.).

mapping_type Mapping type.

The value can be "Normal" and "Domain". Where:

  • "Normal": user (group) SID mapping.
  • "Domain": domain SID mapping.


Administrator,vstore admin

Usage Guidelines



  • Add an SID mapping rule.

    admin:/>create sid_mapping_rule from_sid=S-1-6-88-5 to_name=localuser1 mapping_type=NORMAL
    Command executed successfully.
  • Add an SID mapping rule.

    admin:/>create sid_mapping_rule from_sid=S-1-5-90 to_sid=S-1-6-88 mapping_type=DOMAIN
    Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378508

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next