No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fs_migration general

change fs_migration general


The change fs_migration general command is used to modify the properties of a migration task.


change fs_migration general source_fs_id=? [ speed=? ]





source_fs_id Source file system ID of a migration task.

To obtain the value, run "show fs_migration general".

speed Migration speed.

The value can be "Low", "Middle", "High", or "Highest", where:

  • "Low": low migration speed (0 MB/s to 5 MB/s), applied when the system's service load is heavy.
  • "Middle": medium migration speed (10 MB/s to 20 MB/s), applied when the system's service load is relatively heavy.
  • "High": high migration speed (50 MB/s to 70 MB/s), applied when the system's service load is relatively light.
  • "Highest": highest migration speed (greater than 100 MB/s), applied when the system's service load is light.



Usage Guidelines



Change the synchronization speed of the migration task whose file system ID is "8" to "Middle".

admin:/>change fs_migration general source_fs_id=8 speed=Middle
Command executed successfully.

System Response


Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406328

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next