No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
remove mapping_view port_group

remove mapping_view port_group

Function

The remove mapping_view port_group command is used to remove a port group from a mapping view.

Format

remove mapping_view port_group { mapping_view_id=? | mapping_view_name=? } { port_group_id=? | port_group_name=? }

Parameters

Parameter

Description

Value

mapping_view_id=? Mapping view ID.

To obtain the value, run "show mapping_view general".

mapping_view_name=? Mapping view name.

To obtain the value, run "show mapping_view general".

port_group_id=? Port group ID.

To obtain the value, run "show mapping_view port_group".

port_group_name=? Port group name.

To obtain the value, run "show mapping_view port_group".

Level

Administrator

Usage Guidelines

None

Example

  • Remove port group "0" from mapping view "1".

    admin:/>remove mapping_view port_group mapping_view_id=1 port_group_id=0
    CAUTION: You are about to modify mappings among LUN groups, host groups, and port groups in the mapping view.
    This operation will make the original mappings become invalid.
    Suggestion: Before performing this operation, ensure that the selected mapping view, LUN groups, host groups, and port groups are correct, and stop host services related to the mapping view.
    Do you wish to continue?(y/n)y
    Remove port group 0 successfully.
  • Remove port group "portgroup1" from mapping view "mappingview1".

    admin:/>remove mapping_view port_group mapping_view_name=mappingview1 port_group_name=portgroup1
    CAUTION: You are about to modify mappings among LUN groups, host groups, and port groups in the mapping view.
    This operation will make the original mappings become invalid.
    Suggestion: Before performing this operation, ensure that the selected mapping view, LUN groups, host groups, and port groups are correct, and stop host services related to the mapping view.
    Do you wish to continue?(y/n)y
    Remove port group portgroup1 successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 376939

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next