No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapshot general

show snapshot general

Function

The show snapshot general command is used to query snapshot information.

Format

show snapshot general [ snapshot_id=? ] [ snapshot_name=? ] [ usage_type=? ]

Parameters

Parameter

Description

Value

snapshot_id=? Snapshot ID.

To obtain the value, run "show snapshot general" without parameters.

snapshot_name=? Snapshot name.

To obtain the value, run "show snapshot general" without parameters.

usage_type=? Snapshot type.

The value can be "LUN_SNAP" or "VVOL_SNAP".

Level

Guest

Usage Guidelines

  • Run show snapshot general to query information about all snapshots.
  • Run show snapshot general snapshot_id=? to query information about a specified snapshot.

Example

Query detailed information about snapshot "1".

admin:/>show snapshot general snapshot_id=1
 
  ID                   : 1
  Name                 : SnapshotName
  Source LUN ID        : 0
  Source LUN Name      : Lun2
  Health Status        : Normal
  Running Status       : Restore
  Capacity             : 1.000GB
  Subscribed Capacity  : 0.000GB
  WWN                  : 6000000100000000196872da00000001
  Time Stamp           : 2013-07-24/14:18:38 +08:00
  Restore Start Time   : 2013-07-24/16:25:04 +08:00
  Restore End Time     : --
  Restore Speed        : Low
  Restore Progress(%)  : 18
  Exposed To Initiator : Unmapped
  IO Priority          : Low                             
  SmartQoS Policy ID   :                                 
  Usage Type           : LUN SNAP                        
  Protection Capacity  : 0.000B
  Description          :

System Response

The following table describes the parameter meanings.

Parameter

Meaning

ID

Snapshot ID.

Name

Snapshot name.

Source LUN ID

Source LUN ID.

Source LUN Name

Source LUN name.

Health Status

Health status of the snapshot.

Running Status

Running status of the snapshot.

Capacity

Snapshot capacity.

Subscribed Capacity

Subscribed capacity.

WWN

World Wide Name (WWN) of the snapshot.

Time Stamp

Time stamp of the snapshot.

Restore Start Time

Restore start time of the snapshot.

Restore End Time

Restore end time of the snapshot.

Restore Speed

Restore speed of the snapshot.

Restore Progress(%)

Restore progress (%).

Exposed To Initiator

Mapped or not.

IO Priority

I/O priority.

SmartQoS Policy ID

SmartQoS policy ID.

Usage Type

Usage type.

Protection Capacity

Protection capacity.

Description

Description.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382632

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next