No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_support user_contact

change remote_support user_contact

Function

The change remote_support user_contact command is used to set a user's contact information.

Format

change remote_support user_contact contact_id=? { first_name=? | last_name=? | email=? | country_calling_code=? | mobile=? } *

Parameters

Parameter

Description

Value

contact_id User contact ID.

The value is an integer from 0 to 4. Press Ctrl+A to view the list of available contacts.

first_name First name of the contact.

The value contains 1 to 63 characters including letters, digits, underscores (_), hyphens (-), and periods (.).

last_name Last name of the contact.

The value contains 1 to 63 characters including letters, digits, underscores (_), hyphens (-), and periods (.).

email Email address of the contact.

The value consists of 5 to 127 ASCII characters.

country_calling_code Country calling code of the contact.

The value contains 1 to 31 characters including digits and symbols (* # + - ( )).

mobile Mobile phone number of the contact.

The value contains 1 to 31 characters including digits and symbols (* # + - ( )).

Level

Super administrator

Usage Guidelines

This command is used to set a user's contact information. A user's contact information can be queried by running the "show remote_support user_contact" command.

Example

Set a user's contact information.

admin:/>change remote_support user_contact contact_id=0 first_name=Feng last_name=Wang email=foo@bar.com country_calling_code=+86 mobile=1234567
Command executed successfully.

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 382934

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next