No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
restore svp vm_system

restore svp vm_system


The restore svp vm_system command is used to roll back SVP operating systems.


restore svp vm_system rollback_stage=?





rollback_stage=? Time when the rollback command is executed.

The value can be "before_reboot" or "after_reboot", where:

  • "before_reboot": The operating system fails to be upgraded, and the rollback command is executed before the restart.
  • "after_reboot": The operating system is successfully upgraded, the system is restarted, but services are unstable. The rollback command is executed after the restart to roll back to the original system.



Usage Guidelines

This command cannot be executed on the CLI to which you log in using the controller's management IP address. Before running this command, log in to the CLI using the SVP's management IP address.


To roll back the VM system of the current system.

developer:/>restore svp vm_system rollback_stage=before_reboot
DANGER: You are about to roll back the VM operating system.This operation restarts the VM.
Suggestion: The disk array cannot be managed during the restart. Ensure that no management software is used.
Have you read danger alert message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378223

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next