No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
delete certificate general

delete certificate general


The delete certificate general command is used to delete CA certificate information from an array.


delete certificate general type=? [ label=? ]





type=? Certificate type.

Possible values are:

  • "call_home_authentication": Call Home authentication.
  • "disk_authentication": disk authentication.
label=? Label.

The value contains 1 to 127 characters including letters, digits, underscores (_), hyphens (-), and periods (.). To obtain the value, run the "show certificate general type=domain_authentication detail=yes" command.



Usage Guidelines



Delete the CA certificate in the Call Home server authentication scenario.

admin:/>delete certificate general type=call_home_authentication label=test
WARNING: You are about to delete the certificate. This operation may cause an SSL connection setup failure.
Suggestion: Before performing this operation, ensure that the risk is acceptable.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.

System Response


Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378085

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next