No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show performance consistency_group

show performance consistency_group


The show performance consistency_group command is used to query the performance statistics on a remote replication consistency group. Run this command to analyze the performance statistics on a remote replication consistency group in real time.


show performance consistency_group { consistency_group_id=? | consistency_group_id_list=? } *





consistency_group_id=? ID of a remote replication consistency group whose performance statistics needs to be queried.

To obtain the value, run "show consistency_group general".

consistency_group_id_list=? ID list of remote replication consistency group tasks on which you want to query performance statistics.
  • To obtain the value, run "show consistency_group general".
  • Separate the IDs of remote replication consistency group tasks with commas (,).
  • A maximum of 50 IDs can be queried.



Usage Guidelines

  • You will be prompted with optional performance statistics categories upon running this command. In this condition, typing a number or multiple numbers (separated by commas) for the selected categories and pressing "Enter" displays the performance statistics for those categories.
  • Performance statistics will be updated in real time.
  • Typing "q" on the command line interface (CLI) exits the active performance statistics display.
  • "consistency_group_id" is mutually exclusive with "consistency_group_id_list".
  • This CLI command can be used only on the primary array of an asynchronous remote replication consistency group to query performance statistics.


Query the statistics on the synchronization duration of the remote replication consistency group whose ID is "74a063ff51090000".

admin:/>show performance consistency_group consistency_group_id=74a063ff51090000
0.Synchronization Duration(s)    
Input item(s) number separated by comma:0
  Synchronization Duration(s) : --
  Synchronization Duration(s) : --

System Response

The following table describes the parameter meanings.



Synchronization Duration(s)

Synchronization duration (expressed in seconds).

Updated: 2020-03-19

Document ID: EDOC1000181601

Views: 406332

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next