No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
test system trust

test system trust


This test system trust command is used to test whether the system can be trusted and show the test result to users.


test system trust [ controller_id=? ]





controller_id Controller ID.

The value is in the format of "XA", "XB", "XC", or "XD", where "X" indicates an integer from 0 to 3, for example, "0A" or "1C".


Super administrator

Usage Guidelines



Test whether the system can be trusted and show the test result to users.

admin:/>test system trust
WARNING: You are about to test whether the system can be trusted. This process takes a few minutes.
Suggestion: Before performing this operation, confirm that you need to test whether the system can be trusted.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Controller ID   Test Result
-------------   -----------
0A              Trusted
0B              Untrusted
0C              Cannot be determined
0D              Trusted

System Response

The following table describes the parameter meanings.



Controller ID

Controller ID.

Test Result

Result of testing whether the system can be trusted.

Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 378226

Downloads: 49

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next