No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5 storage systems. It describes hardware installation of those storage systems for helping you easily and quickly finish the installation.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
add failover_group eth_port

add failover_group eth_port

Function

The add failover_group eth_port command is used to add Ethernet ports to a customized failover group.

Format

add failover_group eth_port failover_group_id=? eth_port_list=?

Parameters

Parameter

Description

Value

failover_group_id=? ID of a failover group.
  • The value is an integer between 1 and 1024.
  • To obtain the value, run the "show failover_group general" command without parameters.
eth_port_list=? List of Ethernet ports.
  • To obtain the value, run the "show port general physical_type=ETH logic_type=Host_Port" command.
  • When multiple Ethernet ports are entered, separate the port names from each other using commas (,).

Level

Administrator

Usage Guidelines

  • The "failover_group_id" supports only the ID of a customized failover group.
  • The "eth_port_list" supports one or more Ethernet port names.

Example

  • Add an Ethernet port to a customized failover group.

    admin:/>add failover_group eth_port failover_group_id=1 eth_port_list=CTEO.A1.P1
    Add ETH port CTE0.A1.P1 to failover group successfully.
  • Add Ethernet ports to a customized failover group.

    admin:/>add failover_group eth_port failover_group_id=1 eth_port_list=CTE0.A1.P1,CTE0.A1.P2
    Add ETH port CTE0.A1.P1 to failover group successfully.
    Add ETH port CTE0.A1.P2 to failover group successfully.
  • Add Ethernet ports to a customized failover group.

    admin:/>add failover_group eth_port failover_group_id=1 eth_port_list=CTE0.A1.P1,CTE0.B1.P2
    Add ETH port CTE0.A1.P1 to failover group successfully.
    Error: The object does not exist.
    Add ETH port CTE0.B1.P2 to failover group failed. 

System Response

None

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181601

Views: 380583

Downloads: 56

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next