No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Qos show io_class_param

Qos show io_class_param


The Qos show io_class_param command is used to view the param information of io class.


Qos show io_class_param




Diagnostic view

Usage Guidelines



View the information of io class.

admin:/diagnose> Qos show io_class_param 
Control class check timer                     : 5 seconds 
Trigger class check timer                     : 10 seconds

System Response

The following table describes the parameter meanings.



Control class check timer

Interval of checking the control policy.

Trigger class check timer

Interval of checking the trigger policy.

Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 658453

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next