No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show pal vaai_list

show pal vaai_list


The show pal vaai_list command is used to query clone task details in the specified file system.


show pal vaai_list file_system_id=? [ controller=? ]





file_system_id=? File system ID.

To obtain the value, run the "show file_system general" command without parameters.

controller=? Controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines



Query all the VM information about file system "1".

developer:/>show pal vaai_list file_system_id=1 
  Source File System ID  Source File ID  Destination File System ID  Destination File ID  Status  Progress Skip Zero
  ---------------------  --------------  --------------------------  -------------------  ------  -------- ---------
  1                      30689           0                           30794                1       --        --

System Response

The following table describes the parameter meanings.



Source File System ID

ID of the source file system in the clone task.

Source File ID

ID of the source file in the clone task.

Destination File System ID

ID of the target file system in the clone task.

Destination File ID

ID of the target file in the clone task.


Clone status.


Clone progress.

Skip Zero

Whether zero pages are ignored during clone.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 762240

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next