show dlm ccdb_receive_event
Function
The show dlm ccdb_receive_event command is used to view ccdb historical received event information.
Format
show dlm ccdb_receive_event controller=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller=? |
Indicates the controller ID. |
The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C". |
Views
Developer view
Usage Guidelines
Run the "show dlm ccdb_receive_event" command to view ccdb historical event information.
Example
View ccdb historical received event information.
developer:/>show dlm ccdb_receive_event controller=0A
Sequence Local Node ID Subscribe Event Event Version State Source Node ID Node ID Sequence Number Time
-------- ------------- --------------- ------------- ---------------- -------------- ------- --------------- ---------------------
0 0 1 7 <node_online> 0 0 0 [2015-04-28 16:40:00]
1 0 1 7 internal_task 0 0 2 [2015-04-28 16:40:07]
2 0 1 7 internal_task 0 0 3 [2015-04-28 16:40:07]
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Sequence |
Sequence number. |
Local Node ID |
Local node ID. |
Subscribe Event |
Event subscribtion. |
Event Version |
Event version. |
State |
Status. |
Source Node ID |
Source node ID. |
Node ID |
Node ID. |
Sequence Number |
Sequence number. |
Time |
Time. |
Previous
