No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change disk_domain pause_relocation_task

change disk_domain pause_relocation_task

Function

The change disk_domain pause_relocation_task command is used to set the suspension period of reconstruction, pre-copy, and balancing tasks on the current controller.

Format

change disk_domain pause_relocation_task time=?

Parameters

Parameter

Description

Value

time=?

Suspension period of reconstruction, pre-copy, and balancing tasks, expressed in hours.

The value must be an integer from 0 to 240.

Views

Developer view

Usage Guidelines

None

Example

Suspending the reconstruction, pre-copy and balancing tasks for one hour.

developer:/>change disk_domain pause_relocation_task time=1 
WARNING: You are about to suspend the startup of the new reconstruction, pre-copy, and balancing tasks for the controller. This operation may compromise disk domain reliability, cause data imbalance in the disk domain, or even interrupt services. 
This command is used to suspend the startup of new reconstruction, pre-copy, and balancing tasks for the controller within a specified time. If you need to suspend new reconstruction, pre-copy, and balancing tasks for the entire system, run this command on all controllers.  
Suggestion: Before performing this operation, ensure that you need to suspend the startup of new reconstruction, pre-copy, and balancing tasks for the controller.  
Do you wish to continue?(y/n)y 
Command executed successfully. 
developer:/>

System Response

None

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 621492

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next