Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change dha modelswitch
Function
The change dha modelswitch command is used to set the status for the DHA factor model switch.
Format
change dha modelswitch model_type=? model_switch=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
model_type=? |
Model type. |
The value can be "single", "multiple", or "score". where:
|
model_switch=? |
Model switch. |
The value can be:
|
Views
Developer view
Usage Guidelines
After the command is executed, the DHA module will set the status for the DHA factor model switch.
OceanStor 18500 V5/18800 V5 storage systems support this command.
Example
Set the status of the DHA multi-factor model switch to "on".
developer:/>change dha modelswitch model_type=multiple model_switch=on
Command executed successfully.
System Response
None
Previous
