No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr showverifyinfo

mrr showverifyinfo


The mrr showverifyinfo command is used to view the status of metadata verification.


mrr showverifyinfo




Diagnostic view

Usage Guidelines



View the metadata verification status.

admin:/diagnose>mrr showverifyinfo
Operate Type                  : data extent
Disk Domain ID                : 0
Result                        : ---
Fail Reason                   : ---
Begin Time                    : ---
End Time                      : ---
Spa Count Value               : 0,0
Verify Extent Number          : 0
Item Leak Number              : 0
Conflict LUN/FS               : 0
Conflict Queue                : 0
Conflict Extent               : 0

System Response

The following table describes the parameter meanings.



Operate Type

Indicates the operate type.

Disk Domain ID

Indicates the disk domain ID.


Indicates the result of the operation.

Fail Reason

Indicates the fail reason of the operation.

Begin Time

Indicates the begin time of the operation.

End Time

Indicates the end time of the operation.

Spa Count Value

Indicates the count of spa module.

Verify Extent Number

Indicates the count of verify extent.

Item Leak Number

Indicates the count of leak item.

Conflict LUN/FS

Indicates the conflict count of LUN/file system.

Conflict Queue

Indicates the conflict count of queue.

Conflict Extent

Indicates the conflict count of extent.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 756768

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next