Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
restore disk general
Function
The restore disk general command is used to restore an isolated member disk.
Format
restore disk general disk_id=?
Parameters
Parameter |
Description |
Value |
|---|---|---|
disk_id=? |
ID of the disk. |
To obtain the value, run the "show disk general" command without parameters. |
Views
Developer view
Usage Guidelines
None
Example
Restore an isolated member disk.
developer:/>restore disk general disk_id=DAE000.0
WARNING: You are about to restore an isolated member disk. This operation connects an identified risky disk (such as a failed or faulty disk) to the system, which may cause data loss.
Suggestion: Before performing this operation, ensure that the isolated member disk needs to be recovered.
Have you read warning message carefully?(y/n)y
Are you sure you really want to perform the operation?(y/n)y
Command executed successfully.
System Response
None
Previous
