No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
drvfcoe showbusyexch

drvfcoe showbusyexch

Function

The drvfcoe showbusyexch command is used to view the exchange resources of a Fibre Channel over Ethernet (FCoE) driver.

Format

drvfcoe showbusyexch interface=?

Parameters

Parameter

Description

Value

interface=? FCoE port ID.

-

Views

Diagnostic view

Usage Guidelines

OceanStor 18500 V5, 18500F V5, 18800 V5 and 18800F V5 storage systems support this command.

Example

View the exchange resource of the FCoE driver in port eth7.

admin:/diagnose>drvfcoe showbusyexch interface=eth7
Total : 2039
Busy : 9

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Total

Number of remaining exchange resources.

Busy

Number of exchange resources in use.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 758687

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next