No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
usermode sio show slowthresh

usermode sio show slowthresh

Function

The usermode sio show slowthresh command is used to query the slow disk threshold setting mode and the threshold value in user mode.

Format

usermode sio show slowthresh [ sdid=? ]

Parameters

Parameter

Description

Value

sdid=? Physical ID of a disk.

To obtain the value, run "usermode hdm show diskfwconf" without parameter.

Views

Diagnostic view

Usage Guidelines

OceanStor 18500 V5 Kunpeng, 18500F V5 Kunpeng, 18800 V5 Kunpeng and 18800F V5 Kunpeng storage systems support this command.

Example

  • Query the slow disk threshold of a disk when the system uses the automatic slow disk threshold setting mode.

    admin:/diagnose>usermode sio show slowthresh sdid=64
    model : auto get
    sdid : 64
    hostid : 6
    hostrefcount : 2
    slowthresh : 100
    lowthroughoutnum : 288 216 144 72 0
    lowthroughoutthresh : 3000 550 450 250 100
  • Query the slow disk threshold of a disk when the system uses the manual slow disk threshold setting mode.

    admin:/diagnose>usermode sio show slowthresh sdid=64
    model : customer set
    sdid : 64
    thresh : 200
  • Query the slow disk threshold when the system uses the manual slow disk threshold setting mode.

    admin:/diagnose>usermode sio show slowthresh
    model : customer set
    thresh : 200
  • Query the slow disk threshold when the system uses the automatic slow disk threshold setting mode.

    admin:/diagnose>usermode sio show slowthresh
    model : auto get
    lowthroughoutnum : 288 216 144 72 0
    lowthroughoutthresh : 3000 550 450 250 100

System Response

The following table describes the parameter meanings.

Parameter

Meaning

model

Mode for setting a slow disk threshold.

sdid

Physical ID of a disk.

hostid

ID of the host to which a disk belongs.

hostrefcount

Reference count of the host to which a disk belongs.

lowthroughoutnum

Interval value of the number of disks used by a host.

lowthroughoutthresh

Slow disk threshold values.

slowthresh

Slow disk threshold.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748985

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next