No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show dlm ccdb_publish_event

show dlm ccdb_publish_event


The show dlm ccdb_publish_event command is used to view ccdb historical published event information.


show dlm ccdb_publish_event controller=?





controller=? Indicates the controller ID.

The value is in the format of "XA" or "XB" or "XC" or "XD", where the "X" is an integer ranging from 0 to 3, for example: "0A", "1C".


Developer view

Usage Guidelines

Run the "show dlm ccdb_publish_event" command to view ccdb historical event information.


View ccdb historical published event information.

developer:/>show dlm ccdb_publish_event controller=0A
Sequence Local Node ID Subscribe Event Event Version State Source Node ID Node ID Sequence Number Publish Version Publish Count Complete Count Last Complete Return Time 
 -------- ------------- --------------- ------------- ---------------- -------------- ------- --------------- --------------- ------------- -------------- -------------------- --------------------- 
 0 0 1 7 <node_online> 0 0 0 0 1 1 0x0 [2015-04-28 16:40:00] 
 1 0 1 7 internal_task 0 0 2 0 1 1 0x0 [2015-04-28 16:40:05] 
 2 0 1 7 internal_task 0 0 3 0 1 1 0x0 [2015-04-28 16:40:07] 
 3 0 1 7 internal_task 0 0 4 0 1 1 0x0 [2015-04-28 16:40:07] 

System Response

The following table describes the parameter meanings.




Sequence number.

Local Node ID

Local node ID.

Subscribe Event

Event subscribtion.

Event Version

Event version.



Source Node ID

Source node ID.

Node ID

Node ID.

Sequence Number

Sequence number.

Publish Version

Version publishing.

Publish Count

Publishing count.

Complete Count

Completion count.

Last Complete Return

Last returned value.



Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 764271

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next