No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show omnilock lock_server_stat

show omnilock lock_server_stat


The show omnilock lock_server_stat command is used to check the statistics about server locks.


show omnilock lock_server_stat [ controller=? ]





controller=? -



Developer view

Usage Guidelines



To check the statistics about server locks, run the following command.

----------Server Base Statistics----------
Resource Total : 1
Magic Error : 0
Type Invalid : 0
----------Server Open Lock Statistics----------
Lock Request : 11
Unlock Request : 10
Cache Revoke Request : 0
Cache Revoke Response : 0
Lease Revoke Request : 0
Lease Revoke Response : 0
Wait Request : 0
Lock Failed : 0
Unlock Failed : 0
Invalid Response : 0
Request To Client Error : 0
Grace Number : 0
Reclaim Number : 0
Framework Active Number : 11
Framework Idle Number : 10
Lock Request : 11
Lock Response : 11
Duplicate Request Number : 0
Recoveryed Lock Number : 0
Clear Lock Number : 0
Base Migrate Number : 0
Increased Migrate Number : 0
Revoking Number : 0
----------Server BRL Statistics----------
Lock Request : 0
Unlock Request : 0
Lock Response : 0
Revoke Request : 0
Reclaim Number : 0
Grace Number : 0

System Response

The following table describes the parameter meanings.



Server Base Statistics

Basic statistics about server locks.

Server Open Lock Statistics

Server Open Lock statistics.

Server Brl Statistics

Server byte range lock statistics.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 753320

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next