No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show tgt_switch storage_work_mode

show tgt_switch storage_work_mode


The show tgt_switch storage_work_mode command is used to query whether the A/A work mode of a storage device is enabled.


show tgt_switch storage_work_mode




Developer view

Usage Guidelines



Query whether the A/A work mode of a storage device is enabled.

developer:/>show tgt_switch storage_work_mode
Switch Type  : A/A Work Mode
Switch Status: On

System Response

The following table describes the parameter meanings.



Switch Type

Switch type.

Switch Status

Switch status. The value is "On" or "Off".

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 762202

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next