No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mr checkcrc

mr checkcrc


The mr checkcrc command is used to check whether the CRC of metadata backed up is consistent.


mr checkcrc -o objectType -p poolId [ -t tierType | -l lunId ]





objectType ID of a backed up metadata object.

Possible values are 12, 17,

and 19.

poolId Disk domain ID.

The ID can be obtained by running the "show disk_domain general" command in super administrator mode.

tierType Tier type.

The value can be 0, 1, or 2,where:

  • 0: tier 0.
  • 1: tier 1.
  • 2: tier 2.
lunId LUN ID.

The value ranges from 0 to n minus one. n indicates the maximum number of LUNs.


Diagnostic view

Usage Guidelines



Check the backed up metadata of LUN 0.

admin:/diagnose>mr checkcrc -o 19 -p 0 -l 0
Checking crc ... ,please wait patiently
check crc pass

System Response


Updated: 2020-03-19

Document ID: EDOC1000181602

Views: 836044

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next