No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mrr rebuildbtreeactioncount

mrr rebuildbtreeactioncount


The mrr rebuildbtreeactioncount command is used to check the statistics of btree rebuild.


mrr rebuildbtreeactioncount




Diagnostic view

Usage Guidelines



To check the statistics of btree rebuild, run the following command.

admin:/diagnose>mrr rebuildbtreeactioncount

  Counter Type    Step Name                         Received      Return Ok     Return Bad    Not Return  
  --------------  --------------------------------  ------------  ------------  ------------  ------------
  BtreeBuild      sync lock btree                              0             0             0             0
  BtreeBuild      prepare build                                0             0             0             0
  BtreeBuild      start pool service                           0             0             0             0
  BtreeBuild      start build btree                            0             0             0             0
  BtreeBuild      sync unlock btree                            0             0             0             0

System Response

The following table describes the parameter meanings.



Counter Type

Count type.

Step Name

Operation type.


Counts of received requests.

Return OK

Times of returning OK.

Return Bad

Times of returning Bad.

Not Return

Times of no return.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763688

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next