No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change shake_alarm general

change shake_alarm general

Function

The change shake_alarm general command is used to modify the function of caching alarms before they are reported.

Format

change shake_alarm general alarm_id=? interval=?

Parameters

Parameter

Description

Value

alarm_id=?

Alarm ID.

The alarm ID must be valid and the ID is in the hexadecimal format.

interval=?

Cache interval.

The value is an integer between 0 and 604800 seconds.

Views

Developer view

Usage Guidelines

  • The alarm ID must be valid and the ID is in the hexadecimal format.
  • The cache interval is an integer between 0 and 604800 seconds.

Example

Modify the function of caching alarms before they are reported.

developer:/>change shake_alarm general alarm_id=0xF0060002 interval=50 
WARNING: You are about to change alarm cache interval before it is reported. After performing this operation, the alarm is cached according to the time that you changed. This causes the alarm to fail to be reported immediately. During alarm cache, if this alarm is recovered, this alarm will not be reported. 
Suggestion: Before performing this operation, ensure that this alarm needs to be cached before it is reported, and the cache interval that you changed is reasonable. 
Have you read warning message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response

The following table describes the parameter meanings.

Parameter

Meaning

alarm_id

Alarm ID.

Interval

Cache interval.

Translation
Download
Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 627403

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next