No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show file_system scrub_error_info

show file_system scrub_error_info


The show file_system scrub_error_info command is used to show the information about file system scanning errors.


show file_system scrub_error_info file_system_id=? [ scrub_error_info_id=? ]





file_system_id=? File system ID.


scrub_error_info_id=? Error ID.



Developer view

Usage Guidelines



  • To show the information about all scanning errors of a file system, run the following command.

    developer:/>show file_system scrub_error_info file_system_id=0
    Scrub Error Info ID Error Code Error Position Object Set ID Object Set Type Object ID Object Type Object Offset Object Length CKG Object ID CKG LBA CKG Length 
    ------------------- ----------- -------------- ------------- --------------- --------- ----------- -------------------- ------------- ------------- ------- ---------- 
    1 2147438924 9 137438953472 0 7 0 18446744073709543424 4096 -- -- --
  • To show the information about a specified error of a file system, run the following command.

    developer:/>show file_system scrub_error_info file_system_id=0
    File System ID: 0
    Scrub Error Info ID: 1
    Error Code: 2147438924
    Error Position: 9
    Object Set ID: 137438953472
    Object Set Type: 0
    Object ID: 7
    Object Type: 1
    Object Offset: 18446744073709543424
    Object Length: 4096
    CKG Object ID: --
    CKG Lba: --
    CKG Length: --

System Response

The following table describes the parameter meanings.



File System ID

File system ID.

Error Code

Error code.

Error Position

Error position.

Object Set ID

Object set ID.

Object ID

Object ID.

Object Offset

Object offset.

Object Length

Object length.

Object Type

Object type.

Object Set Type

Object set type.

CKG Object ID

Chunk group ID.


Chunk group LBA.

CKG Length

Chunk group length.

Scrub Error Info ID

Error ID.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763459

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next