No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change third_party_policy policy

change third_party_policy policy


The change third_party_policy policy command is used to modify a third-party policy.


change third_party_policy policy policy_name=? { priority=? | status=? } *





policy_name=? Policy name.

The value contains 1 to 31 characters including only letters (case insensitive), digits, and underscores (_).

priority=? Policy priority.

The value is an integer and the value range is 1 to 10.

status=? Policy status.

The value can be "on" or "off".


Developer view, vstore developer view

Usage Guidelines

At least one of parameters "priority=?" and "status=?" must be specified.


  • Query the status before modification.

    developer:/>show third_party_policy policy
    Policy ID Policy Name   Type  Priority  Status 
    -------- -------- -------------------  ---------  
       1         test        Async         1        On
  • Modify a third-party policy.

    developer:/>change third_party_policy policy policy_name=test status=off
    Command executed successfully.
  • Query the status after modification.

    developer:/>show third_party_policy policy
    Policy ID Policy Name   Type  Priority  Status  
    -------- -------- -------------------  ---------  
       1         test        Async         1        Off

System Response


Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 750737

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next