No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change remote_replication_vstore link_status

change remote_replication_vstore link_status


The change remote_replication_vstore link_status command is used to change the management link status of the remote replication vStore pairs.


change remote_replication_vstore link_status vstore_pair_id=? [ link_status=? ]






Remote replication vStore pair ID.

The value is a character string consisting of digits and letters.


Management link status.

The value can be "LINK_UP" or "LINK_DOWN".


Developer view

Usage Guidelines



Change the management link status of the remote replication vStore pair whose ID is "9017acaf20050000" to Linkdown.

developer:/>change remote_replication_vstore link_status vstore_pair_id=9017acaf20050000 link_status=Linkdown 
DANGER: You are about to forcibly maintain the remote replication vStore pair. This operation changes the link status of the remote replication vStore pair. 
If the link status of the remote replication vStore pair cannot be recovered, use this forcible operation to change the management link status to Linkup or Linkdown. 
Suggestion: Before performing this operation, contact R&D engineers and perform all steps under their guidance. Besides, confirm that: 
1. No other users perform configurations in the system. 
2. The input parameters are correct. 
Have you read danger alert message carefully?(y/n)y 
Are you sure you really want to perform the operation?(y/n)y 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 660342

Downloads: 56

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next