Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show repair configuration
Function
The show repair configuration command is used to display the current bad sector repair configuration.
Format
show repair configuration
Parameters
None
Views
Developer view
Usage Guidelines
This command is invalid in C20 and follow-up versions and is preserved only to ensure the compatibility of the automatic scripts in previous versions.
Example
To display the current bad sector repair configuration, run the following command:
developer:/>show repair configuration
Enabled : Yes
Period(s) : 100
Times : 6
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Enabled |
Whether bad sector repair is enabled. |
Period(s) |
Cycle of enabling bad sector repair. |
Times |
Number of times that bad sector repair is enabled. |
Previous
