No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show snapsync db

show snapsync db

Function

The show snapsync db command is used to query database information about snapshot synchronization.

Format

show snapsync db snapsync_id=?

Parameters

Parameter

Description

Value

snapsync_id Snapshot synchronization ID.

To obtain the value, run the "show fs_migration db" command.

Views

Developer view

Usage Guidelines

Run this command under the guidance of R&D engineers. This command is only used to query database configuration information about snapshot synchronization when snapshot synchronization cannot be queried on the CLI due to snapshot synchronization database errors. Do not use the command in other scenarios.

Example

Query database information about snapshot synchronization "1".

developer:/>show snapsync db snapsync_id=1
  SnapSync ID    : 1  
  Service ID     : 1  
  Local FS ID    : 1  
  Local Dcl ID   : 101 
  Local DB Index : 1  
  Is Primary     : True

System Response

The following table describes the parameter meanings.

Parameter

Meaning

SnapSync ID

Snapshot synchronization ID.

Service ID

Service ID of snapshot synchronization.

Local FS ID

Local file system ID of snapshot synchronization.

Local Dcl ID

DCL ID of snapshot synchronization.

Local DB Index

Local database index of snapshot synchronization.

Is Primary

Whether it is the primary end of snapshot synchronization.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 750343

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next