No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functions and how to set the CLI and manage the storage system through these commands. The document that you browse online matches the latest C version of the product. Click Download to download documents of other C versions.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
change fs_snapshot check_strategy

change fs_snapshot check_strategy


The change fs_snapshot check_strategy command is used to set a policy for checking file system snapshot prerequisites.


change fs_snapshot check_strategy strategy=?






Type of the check policy.

The value can be "min" or "normal", where:

  • "min": checks file system snapshot prerequisites in minimum mode.
  • "normal": checks file system snapshot prerequisites in normal mode.


Developer view

Usage Guidelines

  • The prerequisites check policy takes effect only on commands for creating, deleting, and querying file system snapshots.
  • After the primary controller is powered off, command changes become invalid.
  • You are advised to set the policy for checking file system snapshot prerequisites to the normal mode (the default mode). If the minimum mode needs to be used in some scenarios, change the mode back to normal after the operations are done.


Set the policy for checking file system snapshot prerequisites to the minimum mode.

developer:/>change fs_snapshot check_strategy strategy=min 
Command executed successfully.

System Response


Updated: 2019-07-11

Document ID: EDOC1000181602

Views: 627413

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next