No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

Advanced O&M Command Reference
OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show service cifs

show service cifs


The show service cifs command is used to query information about the CIFS share service.


show service cifs




Developer view, vstore developer view

Usage Guidelines



Query information about the CIFS share service in developer mode.

developer:/>show service cifs
Running Status        : Start
Security Model        : All Attestation
Guest Enabled        : No
Anonymous Enabled      : No
Signing Required       : No
Signing Enabled       : No
Oplock Enabled        : Yes
Oplock Timeout(s)      : 35
Notify Enabled        : No
Durable Handle Enabled   : Yes
Durable Handle Timeout(s)  : 60
ABSE Enabled         : No
SMB1 Enabled         : Yes
SMB2 Enabled         : Yes
Default Dir Mode : 744
Default File Mode : 744
Short Name Enabled     : Yes
Continuous QueryDir Enabled : No
Mac Transcoding Enabled   : Yes
Notify Response QPS : 0
Global Namespace Capacity : 256.000TB
Global Namespace Forward Enabled : No
SMB2 Enabled for DC Connections : Yes
LeaseV2 Enabled : Yes
Smb1 Enabled for Linux : Yes
Symlink Enabled : Yes
Domain Name Configurable Enable: Yes
I/O Trace Enabled : Yes
Administrators Privilege : Admin
NTLM Logonex Enable : No

System Response

The following table describes the parameter meanings.



Running Status

Status of the CIFS share service.

Security Model

Authentication mode. The value can be "Local Attestation", "Domain Attestation", or "All Attestation".

The default value is "All Attestation".

Guest Enabled

Whether guest access is allowed. The default value is FALSE.

Anonymous Enabled

Whether anonymous access is allowed.

Signing Required

Whether the CIFS client must support the signature.

Signing Enabled

Whether to enable the signature for the CIFS protocol.

Oplock Enabled

Whether to enable opportunistic locking (oplock) (after a protocol is locked, the file system does not require a lock).

Oplock Timeout(s)

Timeout period of oplock, expressed in seconds.

Notify Enabled

Whether to enable Notify.

Durable Handle Enabled

Whether to enable Durable Handle.

Durable Handle Timeout(s)

Timeout period of Durable Handle, expressed in seconds.

ABSE Enabled

Whether access based on share enumeration is allowed.

SMB1 Enabled

Whether to enable SMB1.

SMB2 Enabled

Whether to enable SMB2.

Short Name Enabled

Whether to enable the short name.

Continuous QueryDir Enabled

Whether to enable the continuous directory query.

Mac Transcoding Enabled

Whether to enable the character conversion for the Mac operating system.

Global Namespace Capacity

Global namespace capacity.

Notify Response QPS

Response speed of the Notify packet in the CIFS.

Default Dir Mode

Default mode of the new directory when no ACL is inherited.

Default File Mode

Default mode of the new file when no ACL is inherited.

Global Namespace Forward Enabled

Whether to enable global namespace forward.

SMB2 Enabled for DC Connections

Whether connecting domain controller over SMB2 is enabled.

LeaseV2 Enabled

Whether to enable LeaseV2.

Smb1 Enabled for Linux

Whether to enable SMB1 for Linux operating systems.

Max Sessions Display

Maximum number of returned sessions queried through MMC.

Max Open Files Display

Maximum number of returned open files queried through MMC.

Symlink Enabled

Whether the symlink function is enabled.

Domain Name Configurable Enable

Whether to enable the function of using a system name as a resource user's domain name.

I/O Trace Enabled

Whether to enable or disable the CIFS I/O trace function.

Administrators Privilege

Privilege configuration of the Administrators group.

NTLM Logonex Enable

Whether to enable the function of NTLM Logonex.

Updated: 2020-03-19

Document ID: EDOC1000181602

Views: 846961

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next