No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
show fs_snap_control action

show fs_snap_control action

Function

The show fs_snap_control action command is used to view the procedure for executing a specific file system snapshot command.

Format

show fs_snap_control action file_system_id=? controller=? [ snap_name=? ]

Parameters

Parameter

Description

Value

file_system_id=? ID of the file system whose snapshot information you want to query.

To obtain the value, run the "show file_system general" command.

snap_name=? Snapshot name.

To obtain the value, run the "show fs_snapshot general" command.

controller=? ID of a controller.

To obtain the value, run "show controller general".

Views

Developer view

Usage Guidelines

Before performing this operation, check whether the file system ID and snapshot name to be queried are correct.

Example

View operations on snapshot "sp0" of file system "0".

developer:/>show fs_snap_control action file_system_id=0 controller=0A snap_name=sp0
Time Task ID Action Result 
------------------- ------- ---------------------------------- ------ 
2015-04-30 01:37:21 6 CREATE TASK OK 
2015-04-30 01:37:21 6 SNAP_ACTION_CHECK_MODIFY_SNAP_TYPE INIT 
2015-04-30 01:37:21 6 SNAP_ACTION_CHECK_MODIFY_SNAP_TYPE OK 
2015-04-30 01:37:21 6 SNAP_ACTION_FS_STOP_SNAP_IO OK 
2015-04-30 01:37:21 6 SNAP_ACTION_FS_GET_SNAPID OK 
2015-04-30 01:37:21 6 SNAP_ACTION_FS_DELETE_PAL_RES OK 
2015-04-30 01:37:21 6 SNAP_ACTION_FS_DELETE OK 
2015-04-30 01:37:21 6 SNAP_ACTION_FS_TASK_OVER OK 
2015-04-30 01:37:21 6 FINISH OK 
2015-04-30 01:39:59 10 CREATE TASK OK 
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE INIT 
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE INIT 
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE OK 
2015-04-30 01:39:59 10 SNAP_ACTION_FS_CREATE_FILL_RET OK 
2015-04-30 01:39:59 10 SNAP_ACTION_FS_TASK_OVER OK

System Response

The following table describes the parameter meanings.

Parameter

Meaning

Time

Time.

Task ID

Task ID.

Action

Procedure.

Result

Result.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 748943

Downloads: 64

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next