Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
xnet showlinkevent
Function
The xnet showlinkevent command is used to show information about the reported events of a connection.
Format
xnet showlinkevent {-c controller | -a }
Parameters
Parameter |
Description |
Value |
|---|---|---|
controller |
Node ID. |
The value ranges from 0 to 15. |
-a |
Shows all nodes. |
- |
Views
Diagnostic view
Usage Guidelines
None
Example
- Show information about the reported events of the connection on node "1".
admin:/diagnose>xnet showlinkevent -c 1 Local control ID : 0. Index Execute Time Event Name Dest Nid ----- ------------------- --------------------- -------- 4 2017-01-16 04:59:22 EN_XNET_CTRL_LINKUP 1 5 2017-01-16 04:59:22 EN_XNET_DATA_LINKUP 1
- Show information about the reported events of connections on all nodes.
admin:/diagnose>xnet showlinkevent -a Local control ID : 0. Index Execute Time Event Name Dest Nid ----- ------------------- --------------------- -------- 0 2017-01-16 04:59:19 EN_XNET_CTRL_LINKUP 3 1 2017-01-16 04:59:19 EN_XNET_DATA_LINKUP 3 2 2017-01-16 04:59:20 EN_XNET_CTRL_LINKUP 2 3 2017-01-16 04:59:20 EN_XNET_DATA_LINKUP 2 4 2017-01-16 04:59:22 EN_XNET_CTRL_LINKUP 1 5 2017-01-16 04:59:22 EN_XNET_DATA_LINKUP 1 6 2017-01-16 06:36:49 EN_XNET_DATA_LINKDOWN 2 7 2017-01-16 06:36:49 EN_XNET_CTRL_LINKDOWN 2 8 2017-01-16 06:37:16 EN_XNET_CTRL_LINKUP 2 9 2017-01-16 06:37:16 EN_XNET_DATA_LINKUP 2 10 2017-01-16 06:37:23 EN_XNET_DATA_LINKDOWN 3 11 2017-01-16 06:37:23 EN_XNET_CTRL_LINKDOWN 3 12 2017-01-16 06:37:26 EN_XNET_DATA_LINKDOWN 2 13 2017-01-16 06:37:26 EN_XNET_CTRL_LINKDOWN 2 14 2017-01-16 06:37:44 EN_XNET_CTRL_LINKUP 3 15 2017-01-16 06:37:44 EN_XNET_DATA_LINKUP 3 16 2017-01-16 06:37:45 EN_XNET_CTRL_LINKUP 2 17 2017-01-16 06:37:45 EN_XNET_DATA_LINKUP 2 18 2017-01-16 06:49:26 EN_XNET_DATA_LINKDOWN 3 19 2017-01-16 06:49:26 EN_XNET_CTRL_LINKDOWN 3 20 2017-01-16 06:49:27 EN_XNET_DATA_LINKDOWN 2 21 2017-01-16 06:49:27 EN_XNET_CTRL_LINKDOWN 2 22 2017-01-16 06:49:45 EN_XNET_CTRL_LINKUP 2 23 2017-01-16 06:49:45 EN_XNET_DATA_LINKUP 2 24 2017-01-16 06:49:45 EN_XNET_CTRL_LINKUP 3 25 2017-01-16 06:49:45 EN_XNET_DATA_LINKUP 3 26 2017-01-19 05:09:16 EN_XNET_DATA_LINKDOWN 2 27 2017-01-19 05:09:16 EN_XNET_CTRL_LINKDOWN 2 28 2017-01-19 05:17:36 EN_XNET_DATA_LINKDOWN 3 29 2017-01-19 05:17:36 EN_XNET_CTRL_LINKDOWN 3
System Response
The following table describes the parameter meanings.
Parameter |
Meaning |
|---|---|
Local control ID |
Local node ID. |
Index |
Statistics ID. |
Execute Time |
Time when the event is reported. |
Event Name |
Event name. |
Dest Nid |
Target node ID. |
EN_XNET_DATA_LINKUP |
Link for XNET data services is up. |
EN_XNET_DATA_LINKDOWN |
Link for XNET data services is down. |
EN_XNET_CTRL_LINKUP |
XNET control link is up. |
EN_XNET_CTRL_LINKDOWN |
XNET control link is down. |
Previous
