No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ftds getnode

ftds getnode


The ftds getnode command is used to query the information of the FTDS node.


ftds getnode locationID





locationID FTDS node uniquely identified by the location ID.

Enumeration value of an FTDS node.


Diagnostic view

Usage Guidelines



Query the information of the FTDS node whose location ID is 0x0002000b.

admin:/diagnose>ftds getnode 0x0002000b
----------------------------dump ftds node information:----------------------------
module       : TGT(0xd, switch-1, level-1)
location     : TGT_FTDS_WRITE_ALLOC(0x2000b)
mode         : STAT(1)
trace level  : SUBSYSTEM(1)
stat  level  : SUBSYSTEM(1)
count level  : SUBSYSTEM(1)
switch       : stat-1, trace-1, data-1, count-0
runinfo      : hanged-0, error-0(start-0, end-0, count-0, endWithTime-0, record-0)
call state   : param invalid-0
statCode     : 1(opNum-1)
curStatPage  : 1
stat. sum    : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
master page  : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
slave page   : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               
history page : recv-0x0                good-0x0                bad-0x0                averd-0x0                maxd-0x0                sumd-0x0                count-0x0               

System Response

The following table describes the parameter meanings.



dump ftds node information

Show FTDS node information.

Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 763537

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next