No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Advanced O&M Command Reference

OceanStor 18000 and 18000F V5 Series V500R007

This document is applicable to OceanStor 18500 V5, 18800 V5, 18500F V5, and 18800F V5. Based on the CLI, this document describes how to use various commands classified by functionsand how to set the CLI and manage the storage system through these commands.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
omm show_status

omm show_status

Function

The omm show_status command is used to view the status of the OM module.

Format

omm show_status <modulename>

Parameters

Parameter

Description

Value

<modulename> Views the status of each submodule of the OM module.

The value can be "om", "mmt", "perf", "aa", "alarm", or "msg_server".

Views

Diagnostic view

Usage Guidelines

  • A maximum of four diagnose clients are supported. If more than four diagnose clients are enabled, the command execution will fail and a message is displayed stating "connect to server fail, try again".
  • The diagnose command does not have any concurrent request prevention mechanism. Therefore, there is possibility that the command fails to be executed on different diagnose clients of the same node.
  • Another diagnose window will be opened if you run the "omm show_status mmt", "omm show_status perf", "omm show_status aa", "omm show_status alarm", or "omm show_status msg_server" command.

Example

  • Query information about online users.

    admin:/diagnose>omm show_status aa
    ****************************************************
                 Module aa Information :            
    ****************************************************
    Online User Information
    User Name      Address Info    Login Time 
    mm_user        172.16.0.1      Mon Feb  9 14:08:29 2015 
    mm_user        172.16.0.1      Mon Feb  9 14:09:07 2015 
    admin          192.168.1.1     Mon Feb  9 15:59:46 2015 
    mm_user        172.16.0.1      Mon Feb  9 16:16:19 2015
  • Query:
    • OM process status.
    • Storage system status.
    • Device IP addresses.
    admin:/diagnose>omm show_status om
    ****************************************************
                 Module Status Information:             
    ****************************************************
    Module       Online Status  CPU   MEM   Thread Status
    omales       online         0     9     normal
    aa           online         0     9     normal
    mmt          online         0     9     normal
    alarm        online         0     31    normal
    omsync       online         0     4     normal
    perf         online         0     7     normal
    msg_server   online         0     6     normal
    ****************************************************
                 system Status Information:             
    ****************************************************
    Node_ID:      0
    Master_ID:    0
    Role:         1
    Sys_status:   3
    szCoffStatus: normal
    uiCofferMem:  3423
     
    omdb.dat:     normal
    almrecord.dat:normal
    ommlogin.dat :normal
    Om_Package:   2015-01-28_17:58:51
    ****************************************************
                 system IP Information:                 
    ****************************************************
    Node_ID:     0
    Bond_IP:     172.16.1.10
    InternalIP:  172.16.1.10,--
    ExternalIp:  172.16.0.1,--
    ManageEthIP: 172.16.0.1,--
  • Query connections between the network management client and the storage system.

    admin:/diagnose>omm show_status mmt
    ****************************************************
                 mmt client status :                    
    ****************************************************
    Proto  Recv-Q  Send-Q  Local Address        Foreign Address      State        PID/Program name   
    tcp         0       0  127.0.0.1:38631      127.0.0.1:8080       ESTABLISHED  32173/ismcli        
    tcp         0       0  127.0.0.1:38414      127.0.0.1:8080       ESTABLISHED  9741/snmpagent      
    tcp         0       0  127.0.0.1:38601      127.0.0.1:8080       ESTABLISHED  4625/ismcli         
    tcp         0       0  127.0.0.1:36783      127.0.0.1:8080       ESTABLISHED  28054/ibase         
    tcp         0       0  127.0.0.1:38413      127.0.0.1:8080       ESTABLISHED  9741/snmpagent

System Response

The following table describes the parameter meanings.

Parameter

Meaning

User Name

User name.

Address Info

Login IP address of a user.

Login Time

Time when the user logs in.

Module

Module name.

Online Status

Online status of the module.

CPU

Usage of the module CPU.

MEM

Usage of the module memory.

Thread Status

Thread status of the module.

Node_ID

ID of the current node.

Master_ID

ID of the primary node.

Role

Controller's role in the storage system.

"0" indicates that the controller has not been added to the cluster.

"1" indicates that the controller is the primary controller.

"2" indicates that the controller is secondary controller A.

"3" indicates that the controller is secondary controller B.

"4" indicates that the controller is a common controller.

Sys_status

Storage system status.

"0" indicates that device initialization starts.

"1" indicates that the primary and secondary competition is complete.

"2" indicates that the database is successfully started.

"3" indicates that the storage system is successfully powered on.

szCoffStatus

Status of the szCoffStatus.

uiCofferMem

Memory usage of the uiCofferMem.

omdb.dat

Status of the omdb.dat.

almrecord.dat

Status of the almrecord.dat.

ommlogin.dat

Status of the ommlogin.dat.

Om_Package

Compilation time of the Om_Package.

Bond_IP

Bond IP address.

InternalIP

Internal IP address.

ExternalIP

External IP address.

ManageEthIP

Management IP address.

Proto

Protocol that is used.

Recv-Q

Bytes of the receiving queue.

Send-Q

Bytes of the sending queue.

Local Address

Local address.

Foreign Address

External address.

State

Status of the protocol connection.

PID/Program name

PID and process name.

Translation
Download
Updated: 2020-01-17

Document ID: EDOC1000181602

Views: 757279

Downloads: 66

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next